The three-axis economic dispensing robot has the characteristics of high cost-effectiveness. It can replace manual dispensing, drawing straight lines, multi-segment lines and curves, drawing circles and other points on various planar or curved surface products. It also has the characteristics of high quantitative accuracy and good repeatability of dispensing.
Widely used in defense industry, automotive electronics, communications electronics, white power manufacturing, medical equipment, base station communications and other cutting-edge technology industries.
Main specifications and technical parameters of equipment
|
Model |
DJ82207B |
|
|
Axial range |
X、Y axis |
200mm |
|
Z axis |
70mm |
|
|
Axle speed |
X、Y axis |
0.1-600mm/s |
|
Z axis |
0.1-300mm/s |
|
|
Repetitive positioning |
±0.02mm |
|
|
Teaching File Capacity |
Up to 999 files |
|
|
Machining file capacity |
Up to 255 files |
|
|
Load bearing range |
5.0kg |
|
|
Programming Mode |
Programmer |
|
|
Speed Control |
Three-dimensional straight line, circular arc interpolation, automatic rise and fall speed processing with speed prospect |
|
|
Gum discharge |
Open glue ahead of time, turn off glue ahead of time, switch glue delay, segment wire drawing, etc. |
|
|
CAD Graphics Support |
DXF graphics are provided by supporting software to support manual drawing. |
|
|
Appearance dimensions |
L445mm*W350mm*H480mm |
|
|
operating ambient temperature |
0～45℃ |
|
|
Power Supply |
AC220V±10V 50/60Hz |
|
|
Weight |
About 30kg |
|
You may also be interested in this product
